“
- Screw on
- Depth of hinge cup:11.8mm
- Opening angle 110 degree
- Possible Drilling Distance on the Door(K):3-8mm
- Range of door thickness;18-22mm
- Opening angle 165-180 degree
AUTO SOFT CLOSE SLIDE ON HINGE WITH 04 HOLES MOUNTING PLATE-15 Degree
- Soft Close
- Clip on
- Opening angle 110 degree
- Height of hinge cup:11.3mm
- Range of door thickness:14-21mm
- Overlapping after full adjustment in 23 mm
AUTO SOFT CLOSE SLIDE ON HINGE WITH 04 HOLES MOUNTING PLATE-8 Degree
- Soft Close
- Clip on
- Opening angle 110 degree
- Height of hinge cup:11.3mm
- Range of door thickness:14-21mm
- Overlapping after full adjustment in 23 mm
CORNER HINGE 170 Degree
- Blind Corner Hinge Opening angle 170 degree
- PI corner Hinge opening angle 95 degree
CORNER HINGE 95 Degree
- Blind Corner Hinge Opening angle 170 degree
- PI corner Hinge opening angle 95 degree
E-SERIES BALL BEARNIG SLIDES -10 Inch
- Fine adjustment for gap allowed during fixing
- Seperable and stopping release latch
- Material: Work hardened cold rolled steel 1.0/1.0/1.2mm
E-SERIES BALL BEARNIG SLIDES-14 Inch
- Fine adjustment for gap allowed during fixing
- Seperable and stopping release latch
- Material: Work hardened cold rolled steel 1.0/1.0/1.2mm
E-SERIES BALL BEARNIG SLIDES-20 Inch
- Fine adjustment for gap allowed during fixing
- Seperable and stopping release latch
- Material: Work hardened cold rolled steel 1.0/1.0/1.2mm
SOFT CLOSE BALL BEARING SLIDES-12 Inch
- 32 mm hole pattern for system mounting
- Separable and stopping release latch
- Fine adjustment gap allowed during fixing
- Ideal for Kitchen baskets where full extension of drawer is necessary
- Application : Office Furniture, Kitchen Cabinets, Or Home Drawers.
- Material : Work hardened cold rolled steel 1.5 mm
- Slide Length : 350mm-600mm (14”-24”)
- Load Bearing Capacity : 45 kg
- Finish : Zinc Plated
- Travel : Full Extension or over-travel.
- Importance : The installation gap between rails is 12.7+0.2mm
E-SERIES BALL BEARNIG SLIDES -12 Inch
- Fine adjustment for gap allowed during fixing
- Seperable and stopping release latch
- Material: Work hardened cold rolled steel 1.0/1.0/1.2mm